企業簡介

林德納股份有限公司位于德國阿恩斯托夫，是高檔環保型裝飾裝修材料、天花板、地板、隔墻系統等產品的供應商，擁有超過40年的生產經驗。林德納在全球范圍內有超過40家的獨資子公司，在歐洲的每個國家例如英國、法國、荷蘭等都有子公司。業務活動遍布全球，在美國、俄羅斯等國家有優秀的銷售及項目團隊。員工總數超過5,500名。

林德納新型建筑材料（太倉）有限公司作為德國林德納股份有限公司的全資子公司，于2003年在江蘇太倉建立。主要產品有：金屬天花系統、制冷制熱技術、金屬包墻、金屬隔斷系統、玻璃隔斷系統、門框、聚酯粉末噴涂等，主要應用于機場、地鐵站等項目工程。為了更好地服務亞太地區的客戶，2007年上海林得納建筑裝飾工程有限公司成立，主要負責銷售和市場業務。

林德納竭誠歡迎您的加入。

招聘職位

1、質量經理Quality Supervisor/manager   1人   薪資面議

工作地點：太倉新區
工作性質：全職
主要工作：Summary Responsibility/職責綜述：[網址不可見] in charge of the entire Quality department with respect to quality assurance, quality awareness, quality management, personnel, as well as safeguarding the compliance of the organization in according to the ISO 9001 and ISO 14001 management system. Especially focus on PPC pre-treatment to satisfy the requirement of environment.全面負責公司質量部門，以ISO9001及ISO14001體系為目標達成公司質量保證、質量意識、質量管理、公司組織等行為。特別注意噴涂車間的前處理工藝，以確保達成環境管理體系要求。[網址不可見] and improve procedures and develop organizational measurements with regards to health, safety and environmental features. At the same time, take the responsibility of powder coating quality assurance, to make sure all Lindner’s coating quality can reach the related standards or requirements.程序的監控和改善，開發組織測量方法，以達到健康，安全型的環境。同時負責粉末噴涂的質量管控，以確認林德納的噴涂產品質量達到相關標準。[網址不可見] planning, Budget Monitoring, preparing and discussing of monthly / quarterly quality reports is equally important.預算規劃，預算監控，每月/每季度質量報告的編制和討論。Job responsibilities /工作職責:1.Management work of the department, such as: personnel planning, selection, training and retaining of key people.本部門管理工作，如：人員計劃、選拔、培訓和留用；[網址不可見] plan and control.部門預算的制訂及控制；[網址不可見] Management System, including coordination, support and preparation of following works: a) Documented Procedures; b) Working Instructions; c) Check Lists; d) Forms; e) etc.負責質量管理體系，包括對以下工作內容的協調、支持和準備：a）文件形成程序；b）作業指導；c）檢查列表；d）表格；e) 其他4.Consulting and support all parties involved in the QM Process regarding: a) preventive measurements;b) measurements to achieve process reliability; c) preparation of QM documents; d) official tests / checks, etc.為質量管理過程中涉及的各方提供咨詢和支持，包括：a) 防范對策；b) 實現過程的可靠性的測量；c) 質量管理文件的編制；d) 正式測試/檢查等；5.Carrying out Management Reviews and Audits as well as respective documentation and analysis.審查和審計工作的開展，以及相應的文檔制作、審核，并進行分析；[網址不可見] Management Planning (System, Product, Personnel, etc.)制作質量管理計劃（系統、產品、人員等）；[網址不可見] Representative of the top management; Coordinator of the quality representatives of the dif-ferent business units and departments 公司管理層的質量代表；協調各部門質量代表的工作；[網址不可見] information to the top management about the situation on the Quality Management System. Support the top management with enforcement and implementation of corrective actions.向高級管理人員匯報質量管理系統情況；協調高層管理人員施行執行和糾正措施；9.Detection of Quality Problems (quality assurance as well as organizational problems) and initiation of relvant actions to eliminate such problems質量問題的檢測（質量保證和組織問題），采取措施以解決問題；10.Trainings arrangement in area of quality management and provide support.制定質量管理相關方面的培訓，并提供相應的支持；11.Controlling Goods Income and productions “ongoing” inspections, especially double-check the quality of coating result including coating thickness, color difference and so on. To make sure all coating quality is controlled within the standards and avoid the client complaint. 負責進料檢驗及在線檢驗，過程檢驗尤其注意管控包括噴涂厚度，噴涂色差等噴涂結果質量，以保證噴涂產品的質量控制在標準內，避免客訴。12.Responsible decision maker (in cooperation with the production manager) with respect to: 1) usability of the product; 2) reworking of the product; 3) scrapping of the product;同生產經理合作，做以下決定：1）產品的可用性；2）產品改造；3）產品報廢；[網址不可見] work assigned by GM. 總經理分配的其他工作。

其他要求：Qualifications Request /任職要求:1.Bachelor degree with major in Mechanical manufacturing/Engineering/Business Administration or related.本科及以上學歷，機械制造、工程類、工商管理相關專業； [網址不可見] of 5 years concrete quality management experience in manufacturing industry. 至少5年以上制造型企業的質量管理經驗； [網址不可見] & Strategic thinking, good at organizing and evaluating information. patient, higher work efficiency under pressure with multitask.思路清晰，很好的組織及分析能力。有耐心，在壓力下能很好地多任務工作；[網址不可見]-conscious有自覺的成本控制意識；[網址不可見] communication & negotiation & interpersonal skills.很強的溝通協調、商務談判、與人合作能力；[網址不可見] on own initiate, high moviated, high responsibility, reliable.積極主動、自我激勵、高度的責任感、具有良好的品行；[網址不可見] team management and team work spirit, good at cross-function cooperation.良好的團隊管理及團隊合作能力、跨部門合作能力；[網址不可見] English, both speaking and writing.英語流利；[網址不可見] command of office software such as Word, Excel, PPT etc.熟練操作Word, Excel, PPT等辦公軟件。
職位地址：http://www.9999058.com/zpxx_187888.html 

2、CAD專員   2人   薪資面議

工作地點：太倉新區
工作性質：全職
主要工作：1.Responsible to gather all necessary technical information from Sales Dept or Project Dept.負責從銷售部或項目部獲取盡可能全面的所有必須技術信息。[網址不可見] design proposal with lay-out plan, elevation drawings and section drawings. Prepare detail design and bill of quantity.準備項目的設計平面圖、立體圖及剖面圖制作的設計方案；準備深化圖紙和材料清單。[網址不可見] required technical tender documents such as system instruction, performance data, products certificate etc.提供必需的技術標書文件，如系統說明，性能參數及質量證書等；4.Explanation of design proposal.負責解釋設計方案；5.Complete drawings, and Bill of quantity 完成圖紙及材料清單；[網址不可見] on-site measurements and support when necessary.對有必要的，執行現場測量及技術支持工作。7.Cooperated with Technical Application Dep. to make sure new design or non-standard system is workable.與技術應用部門合作并確認新的設計或非標系統切實可行。[網址不可見] non-standard system to Price Estimator if necessary. 如有必要，向報價人員解釋非標系統。[網址不可見] the manufacturing drawings to production for non-standard systems向生產部提供非標系統的加工圖紙。[網址不可見] charge of all drawing up-dates, filing of drawings and related technical documentation.負責所有圖紙的更新，并將圖紙及相關技術文件整理歸檔。[網址不可見] work assigned by Manager.經理分配的其他工作。

要求外語：英語 良好
其他要求：[網址不可見] or above degree in Architecture, Civil & Structure Engineering, Internal Decoration Design or equivalent etc, and holder of internal Decoration designer professional title are preferred.建筑，土木工程，內部裝潢設計等大專或以上學歷，有內部裝潢設計專業資格更佳。[網址不可見] technical understanding.優秀的技術理解力。[網址不可見] least 3 years experience in construction building interior design, 至少有3年以上建筑物內部設計經驗。4.Proactive, responsible, good work management skill and can work independently.積極主動有責任心、良好的工作管理及獨立工作能力；[網址不可見] communication and coordination skills, A good team player.良好的溝通協調能力，及團隊協作能力；[網址不可見] at both written and spoken English. German is a plus.英文聽說讀寫熟練，會德語者優先考慮；7.Professional in CAD專業的CAD技能[網址不可見] available for business trips if required for the projects.能因項目需要，適應出差安排。
職位地址：http://www.9999058.com/zpxx_191081.html 

3、粉末噴涂員   4人   薪資面議

工作地點：太倉新區
工作性質：全職
主要工作：1、 認真遵守公司制定的各項規章制度，服從車間及班組管理。Obey the company' regulations and the management of powder coating shop leader.2、 嚴格按照 “噴涂技術操作規程”作業。 Operating under the WI standards of "powder coating booth".3、 保證噴涂產品的噴涂質量達到標準或客戶要求。Responsible for all coating products quality that can achieve the requirement of company standards or customer.4. 負責噴涂機器的清潔, 日常維護及粉末倉庫的控制。 Responsible for the daily maintenance of coating machine and clean of the powder warehouse.

其他要求：1.熟悉靜電噴槍的組成結構；Be familiar with the electrostatic spray guns and know the function of guns.2.熟悉并會調整噴房設備的工藝參數；Be familiar with the parameter adjustment of coating machine.3.至少三年噴槍手（靜電粉末噴涂 ）的工作經驗，熟悉鈑金件的噴涂。At least 3 years experience in hand coating (Electrostatic Powder coating), and be familiar with the coating process of metal parts.
職位地址：http://www.9999058.com/zpxx_202111.html 

4、Estimator報價員   2人   薪資面議

工作地點：太倉城廂
工作性質：全職
主要工作：a)Calculating the Factory Prices in accordance to the Factory Guideline按照工廠原則計算工廠價格b)Controlling and Improving of the Guidelines in accordance with the Factory Supervisor 按照工廠主管的要求控制和改進計算原則c)Controlling and confirming of the Factory Output regularly with the Factory Supervisor in order to minimize calculation mistakes and in order to be as accurate as possible與工廠主管定期控制和確認工廠產量，將計算錯誤最小化，計算結果盡可能的精確。d)After offer the factory price to client, Filing the offer base on different project in comput-erized version and written version. 跟據不同項目將工廠報價以電腦及書面形式存檔。

學歷要求：本科
工作經驗：2年
要求外語：英語 熟練
其他要求：1. University degree in Engineering, Mechanical, Architectural or related field. 2. At least 2 years related experience. 3. Be able to communicate with sales, engineers, colleagues of procurement and produciton department. 4. Computer proficiency is required, especial for Excel. 5. Be able to source from overseas vendors would be an advantage. 6. High sense of responsibility and loyalty. 7. Good English skill for reading and writting. 1. 機械、工程建筑或相關專業學歷； 2. 2年以上相關工作經驗； 3. 很好的溝通技巧； 4. 熟練操作辦公軟件，尤其是Excel； 5. 有外資工作經驗者優先考慮； 6. 熟練的英語聽說讀寫能力。
職位地址：http://www.9999058.com/zpxx_204452.html 

5、質量工程師   1人   薪資面議

工作地點：太倉新區
工作性質：全職
作息制度：雙休
主要工作：[網址不可見] inspection in production site.生產現場的質量檢驗。2.According to the quality checklist to monitor the product quality states.依據質量檢查表監控產品質量狀況。3.Assistant quality supervisor carry out workshop site process audit.協助質量主管開展車間現場過程審核。[網址不可見] any incompliance to the quality supervisor and notice the production supervisor in time.一旦檢查不符合質量要求，及時報告質量主管并告知生產部門主管。[網址不可見] immediate corrective action such as isolation, stop production etc, in case of quality major problems.一旦有重大質量問題，立即采取應急措施如隔離，停止生產等。[網址不可見] the quality of product, reduce the rate of waste material by efforts 產品的質量控制，努力提高產品的質量。降低廢品率[網址不可見] 1st sample confirmation before machine start-up, conduct random check & random check record during production 生產過程中的首樣確認，抽樣檢驗，并做好檢驗記錄[網址不可見] production process disqualification should record, analyse the reason and then give countermeasure. Decline the disqualification, and make an atmosphere of no defective quality management by correct and adopt preventive measure.對生產過程中出現的不合格進行記錄 ，并分析原因，提出對策，通過糾正和采取預防措施，不斷減少不合格品，營造零缺陷的質量管理氛圍[網址不可見] badness of raw material in production process should record and give explain, and notice the quality in-coming controller to deal with it.生產過程中出現的原材料不良，進行記錄和說明不良點，通知質量進料管理員進行處理[網址不可見] employee production, quality awareness and administrant training to gradually improve staff self-test competence and cognize toward produce.對員工進行產品、質量意識和管理的培訓，不斷提高員工自主檢驗能力和生產產品的認知能力[網址不可見] sure reality and efficiency of site process quality inspection確?，F(xiàn)場過程的質量檢驗真實有效。[網址不可見] sure the status of material/product is clear marked and put into assigned area, always keep the working surrounding in the condition of tidy and cleanness督促員工做好產品標識（含待檢標識），按規定擺放，保持工作現場整潔。13.Optimize the production process quality monitoring in accordance with the DIN ISO9001 quality management system, good cooperation relationship with the production personnel.依據DIN ISO9001質量管理體系的要求優化生產現場質量監控，與生產人員良好的合作關系。

學歷要求：大專
要求外語：英語 熟練
其他要求：- Great communication skills /溝通能力強 - Can cope with great volume of work /能應對大量工作 - Capable to co-operate with other services and departments/善于與其它部門合作 - Great team spirit character/強烈的團隊合作精神 - Have basis knowledge of ISO9001:2008 quality management system/有ISO9001:2008質量管理基礎知識 -Hard-working/工作勤快 - Obey the quality supervisor work arrangement/服從質量主管工作安排 - Fluent English speaking, reading, writting and listening./ 英語聽說讀寫流利； - Be familiar with MS office such as word, excel, PPT etc./熟練使用word，excel等辦公自動化軟件。
職位地址：http://www.9999058.com/zpxx_205118.html 

聯系方式

公司地址：太倉經濟開發區青島東路12號
企業電話：0512-53951000
招聘郵箱：lisa.wen@lindner-group.com.cn